Deflects Rain
The curved hood helps guide falling water around the lens area.
π Never Let Rain Blur Your Rear View Again! 8-Piece Car Rear-View Camera & Mirror Rain Shield π§οΈβ¨
π Never Let Rain Blur Your Rear View Again! 8-Piece Car Rear-View Camera & Mirror Rain Shield π§οΈβ¨
DESIGNED & DEVELOPED IN
Los Angeles, CA
Shopify Secure
BUNDLE & SAVE
Couldn't load pickup availability
β¦
β¦
β¦
β¦
β¦
β¦
250
1776 β 2026
READY TO CELEBRATE?
AMERICA'S
Once-in-a-Lifetime
250TH
BIRTHDAY
β
Fly the Flag. Honor the Legacy. Celebrate the Future. β
-
Ordered
- - -
Order Ready
- - -
Delivered
π Never Let Rain Blur Your Rear View Again! 8-Piece Car Rear-View Camera & Mirror Rain Shield π§οΈβ¨
Regular price
$14.99
Regular price
$14.99
Sale price
$24.99
Unit price
per
Help Keep Rain From Taking Over Your Camera View
This low-profile visor helps redirect rain and drips away from exposed side and rear camera lensesβso you can see more clearly when wet weather hits. π§οΈπ·
π§ Rain-Deflecting Hood 𧩠Flexible PVC π Carbon-Fiber Look π¦ 4- or 8-Piece Set
Protection Designed Around the Camera
Each detail helps solve a simple problem: keeping rain away from the lens without adding a bulky accessory.
π¦ Curved Coverage Helps Shed Water
The arched visor creates a small roof above the camera, helping drips travel around the lens instead of settling directly on it.
π· A Clearer View When Reversing in Rain
By helping limit water buildup near the lens, the visor can make the camera feed easier to use during wet-weather parking and reversing.
𧩠Soft PVC Bends to the Mounting Area
The flexible material is designed to sit against gently curved trim while the compact profile helps avoid obstructing the camera lens.
π Works for Rear and Side Camera Locations
Use the visors around compatible exposed rear-view or side-view camera housings. The multi-piece pack lets you cover more than one camera.
π Details & Specs
Check the Fit Before You Stick
Camera housings vary by vehicle. Compare the available space around your lens before ordering and test-position each visor before installation.
π§Ό Prep the Surface Clean and fully dry the mounting area so the adhesive can make even contact.
π Test the Position Center the visor over the lens and confirm it does not enter the camera's field of view.
π€ Press Into Place Apply the adhesive side to the trim and press firmly across the full contact area.
β³ Let It Set Avoid washing the vehicle or heavy water exposure immediately after installation.
| Product Type | Car camera rain shield / protective visor |
|---|---|
| Material | Flexible PVC |
| Color & Finish | Black with carbon-fiber-style texture |
| Pack Options | 4 pieces or 8 pieces |
| Placement | Compatible side-view and rear-view camera housings |
| Installation | Stick-on mounting to a clean, dry surrounding surface |
| Primary Use | Helps redirect rain and water drips away from the camera lens area |
| In the Package | Selected quantity of camera rain visors |
Compatibility note: This is not a model-specific molded part. Confirm that your camera has enough clean, flat or gently curved surface above it for secure mounting. Do not install where the visor blocks any part of the lens.
Real Comments From Drivers
Published five-star testimonials from the original product page.
β
β
β
β
β
No More Blurry Reversing Camera π§οΈ
Mark says the shields made his daily rainy-weather reversing view easier to use. He also liked the simple stick-on setup and the way they looked on his car.
β Mark Wilsonβ
β
β
β
β
A Practical Car Accessory Gift π
Sarah bought the set for her husband, a frequent long-distance driver. She reports that it worked well on his side cameras and installed in under two minutes.
β Sarah Millerβ
β
β
β
β
Great Match for a Multi-Camera SUV π
David says the four-piece set covered the side and rear cameras on his SUV, and he especially liked how the carbon-fiber texture matched the vehicle's styling.
β David CarterCustomer experiences can vary by vehicle, camera location and installation surface.
β Quick Answers
Frequently Asked Questions
Tap any question to smoothly reveal the answer.
Will this fit every car camera?
Not necessarily. Camera shape, lens position and surrounding trim vary by vehicle. Check that there is enough clean mounting surface above the lens and that the visor will not block the camera's view.
Can I use it on both rear and side cameras?
Yes, the product is designed for compatible exposed rear-view and side-view camera housings. Always test the position before removing the adhesive backing.
Does it make my camera completely waterproof?
No. It is a small protective hood that helps redirect rain and drips away from the lens area. It does not seal the camera, repair a damaged housing or guarantee that every water droplet will be blocked.
How do I prepare the surface?
Remove dirt, wax and moisture from the mounting area, then let it dry completely. Test-fit the visor, apply it evenly and press firmly across the adhesive contact area.
Which pack should I choose?
Choose 4 pieces for a basic multi-camera setup. Choose 8 pieces if you have more camera locations, multiple vehicles or want spare visors available.
Can I rely only on the camera in bad weather?
No. This accessory supports camera visibility but does not replace mirrors, direct observation or safe driving practices. Always check your surroundings before moving the vehicle.
Support From Checkout to Installation
Trackable Delivery
Follow your shipment with the tracking details supplied for your order.
Quality Support
Contact support promptly if your order arrives damaged or incomplete.
Secure Checkout
Complete your purchase through the store's protected checkout.
Helpful Service
Get assistance with product, order and delivery questions.
Give Your Cameras a Little Extra Cover
Choose your 4-piece or 8-piece set, test the fit and make wet-weather camera care easier. ππ§
Buy Now βΒ
